Quality Matters

Emerald holds a number of accreditations from recognised authorities:

British Standards

BS7412: SPECIFICATION FOR PLASTIC WINDOWS MADE FROM uPVC EXTRUDED HOLLOW PROFILES

This kite mark confirms that the products are manufactured to a standard set by the BSI. This also covers severe weather rating, a water and air tight windows.

BS7413: SPECIFICATION FOR WHITE uPVC EXTRUDED HOLLOW PROFILES WITH HEAT WELDED CORNER JOINTS FOR PLASTIC WINDOWS: MATERIAL TYPE 'A'

This kite mark indicates that our profile is of the highest quality. It won't rot. warp, discolour or go brittle. A certificate of ts durability, it uses high impact, grade 1 uPVC.

BS5713: SPECIFICATION FOR HERMETICALLY SEALED FLAT DOUBLE GLAZED UNITS

A double seal ensures that no breakdown of the unit should occur, a sealed unit which will last the test of time, retaining heat and reducing both noise levels and condensation.

BS6262: CODE OF PRACTICE FOR GLAZING FOR BUILDINGS

A recommendation by the BSI to confirm that emerald install toughened safety glass where applicable, other companies charge for this but Emerald fit it as standard.

BS 6206A: SPECIFICATION FOR IMPACT PERFORMANCE REQUIREMENTS FOR FLAT SAFETY GLASS AND SAFETY PLASTICS FOR USE IN BUILDINGS

BS 7950/7412: SPECIFICATION FOR ENHANCED SECURITY PERFORMANCE OF CASEMENT AND TILT/TURN WINDOWS FOR DOMESTIC APPLICATIONS IN ASSOCIATION WITH BS7412

BS EN 12608: uPVC PROFILES FOR THE FABRICATION OF WINDOWS AND DOORS. CLASSIFICATION, REQUIREMENTS AND TEST METHODS

PAS 023-1: GENERAL PERFORMANCE REQUIREMENTS FOR DOOR ASSEMBLIES. SINGLE LEAF, EXTERNAL DOOR ASSEMBLIES TO DWELLINGS.

BS 7619: SPECIFICATION FOR EXTRUDED CELLULAR UNPLASTICISED PVC (PVC-UE) PROFILES.

BS 7950: SPECIFICATION FOR ENHANCED SECURITY PERFORMANCE OF CASEMENT AND TILT/TURN WINDOWS FOR DOMESTIC APPLICATIONS

BS 4873: SPECIFICATION FOR ALUMINIUM ALLOY WINDOWS.

BS EN 1279: GLASS IN BUILDINGS. INSULATING GLASS UNITS (SEALED UNITS). LONG TERM TESTING METHOD AND REQUIREMENTS FOR MOISTURE PENETRATION.

BS 5268: ALUMINIUM PATIO DOORS. STRUCTURAL USE OF TIMER. CODE OF PRACTICE FOR PERMISSABLE STRESS DESIGN, MATERIALS AND WORKMANSHIP.

PAS 024-1: ENHANCED SECURITY PERFORMANCE REQUIREMENTS FOR DOOR ASSEMBLIES. SINGLE LEAF, EXTERNAL DOOR ASSEMBLIES TO SWELLINGS.

BS EN ISO 9002: QUALITY SYSTEMS. MODEL FOR QUALITY ASSURANCE IN PRODUCTION, INSTALLATION AND SERVICING.

BPF/GGF CODE OF PRACTICE FOR THE SURVEY AND INSTALLATION OF HIGH IMPACT MODIFIED uPVC WINDOWS AND DOORS

This code gives guidelines and recommendations for the good practices required for the survey and installation of uPVC windows, including the design and installation of bay windows.

BSI REGISTERED FIRM SCHEME

Incorporates assessment of quality management system, design/development, type testing of products and continuous surveillance and testing by the BSI.

FM31451 QUALITY MANAGEMENT SYSTEM SCOPE

Manufacture and supply of a range of white and brown windows. uPVC profiles and beads for the fabrication of doors and windows. Manufacture of conservatory roofing systems to customer specified requirements.

British Board of Agrement

BBA ASSESSMENT OF EMERALD'S COMPLETE RANGE OF DOORS AND WINDOWS

CONSERVATORY ROOF SYSTEM

uPVC ENTRANCE DOORS

uPVC WHITE ROOFLINE

uPVC WHITE CLADDING

uPVC WINDOWS

ROOF WATERPROOFING SYSTEM

EMERALD uPVC COMPOUND

Emerald uPVC Compound

Emerald use precision cut uPVC profile supplied by Duraflex on all of our products. It is cut using the most up-to-date high-tech computer controlled machinery. All Emerald products are extruded from 100% virgin compound and are not diluted by second or more generation reground extrusion profile.

The glass forms the inner pane of a double glazing unit, with its coating facing the cavity. The coating reflects longer wavelength heat from radiators and room surfaces back into the building. Meanwhile it allows in warming short wavelength solar energy. Conveniently, these short wavelengths of solar energy are re-radiated by internal building surfaces as longer wavelengths, which are then reflected by the coating back into the room.

Our high quality compound windows remain retain their original pristine colour and will not become discoloured over time like some of our rivals' inferior quality products.

<< Return to homepage